SAMSUNG
General Description
DCS-816
March 1999
4 - 20
Hearing Aid Compatible
All keysets are hearing aid compatible.
Line Queuing with Callback
When the desired outside is busy, the user can press the CALLBACK key or dial
the access code to place his/her station in a queue. The user will be called back
when the line is available (a maximum of 100 callbacks are allowed system–wide
at one time including busy station and busy trunk).
Line Skipping
When the user is talking on an outside line and the automatic hold feature is
turned off, he/she may press an idle line key and skip to that line without causing
the previous call to go on hold.
Loud Ringing Interface
Ring tone can be provided to the external page port connecting to a customer–
provided amplifying device. The output can then be assigned to ring with a
specific station to provide loud ringing capability.
Message Waiting Light/Indication
When a message indication is left at a keyset, the MESSAGE key will slowly flash
red. SLTs will receive a distinctive dial tone to notify them that a message is
waiting. Message waiting indications can be left for any station or group of
stations.
Mute Microphone/Handset
Any keyset user can mute the keyset's handset transmitter by pressing the MUTE
key. In addition, keyset users can also mute the keyset microphone while the
keyset is in speakerphone mode.
Off
–
Hook Ringing
When a keyset is in use, the system will provide an off–hook ring signal to
indicate that another call is waiting. The ring signal is a single ring repeated. The
interval is controlled by a system–wide timer. Single line stations will receive a
tone burst through the handset receiver instead of a ring.
Off
–
Hook Voice Announce (OHVA)
Keysets may receive a voice announcement while on another call. The calling
station must have an OHVA key. When transferring a call to a busy keyset or
while listening to busy signal, the station user can press the OHVA key to make
an OHVA call to the busy keyset. If the called keyset is in the DND mode, it
cannot receive OHVA calls.
One Time Do Not Disturb
The Do Not Disturb (One Time) feature is used to stop all calls to a station when
the user is on an outside line and does not want to be disturbed for the duration
of the call. Upon completion of the call, DND is cancelled and the station is
returned to normal service. This feature requires a programmed key.
