10
power on and volume control
tUrning the POWer On/Off
MUTE
VOL
BASS
FUNCTION
MUTE
VOL
BASS
FUNCTION
DOCK
DOCK
DOCK
DOCK
DOCK
DOCK
DOCK
DOCK
or
1
.
To turn on this unit, press any button on the unit's top panel when the unit is in Standby mode.
or,
Press
POweR
on the remote control.
2
.
To turn off this unit, press the
+#
button on the unit's top panel for more than 3 seconds.
or,
Press
POweR
on the remote control again.
▪
it will take about 20 seconds until the power of the unit turns on because of the preheating time of
the amplifier.
aDJUsting the VOLUMe
Use +,- buttons to adjust the volume. The function LEDs light from left to right when you turn the volume up and
from right to left when you turn the volume down. The LEDs do not light if you try to increase the volume when it has
already been set to maximum or try to decrease the volume when it has already been set to minimum.
MUTE
VOL
BASS
FUNCTION
MUTE
VOL
BASS
FUNCTION
DOCK
DOCK
DOCK
DOCK
DOCK
DOCK
DOCK
DOCK
or
Press the
+/–
button on the right side of the top panel.
or,
Press
vOL +/–
on the remote control.
▪
The volume level increases or decreases when you press VOL +/–.
▪
You can also use the volume controls of devices connected using the Dual Dock or Bluetooth to control
the volume. However, your ability to control the volume using the volume controls of devices connected
using Bluetooth may be limited.
