7
EN
Checking that Your Oven is Operating Correctly
The following simple procedure enables you to check that your oven is
working correctly at all times. If you are in doubt, refer to the section
entitled “What to Do if You are in Doubt or Have a Problem” on the page.
The oven must be plugged into an appropriate wall socket. The
turntable must be in position in the oven. If a power level other
than the maximum (100% - 900 W) is used, the water takes
longer to boil.
Open the oven door by pulling the handle on the right side of the door.
Place a glass of water on the turntable. Close the door.
Setting a Standing Time
The Hold Time can be used to set a standing time automatically (without
microwave cooking).
Press the
Start
button and set the time to 4 or 5 minutes, by
pressing the
Start
button the appropriate number of times.
Result:
The oven heats the water for 4 or 5 minutes.
The water should then be boiling.
1.
Press the
Hold Timer
button.
Result:
The following indication isdisplayed :
(Hold/Delay mode)
2.
Set the grilling time by pressing the
10min,1min
and
10s
buttons .
3.
Press
Start
button.
Result:
The oven beeps when the standing time is over.
jzX]]Wz{mhTWZZ[`hTWXluUGGwG^GGm SGzGX[SGYWW^GGXWaZ^Ght
