Samsung CS-29Z40, Инструкция пользователя

Страница: 6 / 32

English - 6
1
Connecting to an Aerial or Cable Television Network
Connect the aerial or network input cable to the 75
Ω
coaxial socket.
To view television channels correctly, a signal must be received by the set from one of the sources: an outdoor aerial, cable
television network, or satellite network. If you are using an indoor aerial, you may need to adjust it when tuning your television
until you obtain a picture that is both sharp and clear.
2 Connecting to the COMPONENT Input
◆
Connect component video cables to component connector ( Y , P
B
, P
R
) on the rear of your television and the other ends to
corresponding component video out connectors on the DTV receiver or DVD player.
◆
The Y, P
B
and P
R
connectors on your component devices (DTV receiver or DVD player) are sometimes labeled Y, B-Y and R-Y
or Y, Cb and Cr.
◆ Connect RCA audio cables to
AUDIO (L/R) IN
on the rear of your television and the other ends to corresponding audio out
connectors on the DTV receiver or DVD player.
3
Connecting to the SCART Input/Output
Connect SCART cable to an appropriate external A/V device such as a VCR, DVD player, decoder, satellite receiver, video game
device, or video disc player.
- The EXT1 (RGB) connector is used for equipment with an RGB output, such as a video game device or video disc player.
- The EXT2 (AV) connector is used for the audio/video output of current television programme.
4
Connecting to the HDMI (depending on the model)
◆
Supports connections between HDMI-connection-enabled AV devices (Set-Top Boxes, DVD players, AV receivers and
digital TVs).
◆
No additional Audio connection is needed for an HDMI to HDMI connection.
What is HDMI?
◆
“High Definition Multimedia interface” allows the transmission of high definition digital video data and multiple channels
of digital audio (5.1 channels).
The HDMI/DVI terminal supports DVI connection to an extended device with the appropriate cable (not supplied). The
difference between HDMI and DVI is that the HDMI device is smaller in size, has the HDCP (High Bandwidth Digital Copy
Protection) coding feature installed, and supports multi - channel digital audio.
◆
You should use the DVI-to-HDMI cable or DVI-HDMI Adapter for the connection, and the AUDIO (L/R) connector on DVI for
sound output.
When connecting this product via HDMI or DVI to a Set Top Box, DVD Player or Games Console etc, make sure that it has
been set to a compatible video output mode as shown in the table below. Failure to observe this may result in picture
distortion, image breakup or no picture.
Supported modes for HDMI and COMPONENT
480i-60Hz 480p-60Hz 576i-50Hz 576p-50Hz 720p-50/60Hz 1080i-50/60Hz
HDMI X O X O O O
Component O O O O O O
Do not attempt to connect the HDMI connector to a PC or Laptop Graphics Card.
(This will result in a blank screen being displayed.)
5
Connecting to the RCA/S-VIDEO Input
◆
Connect RCA video or S-Video cable to
VIDEO IN
or
S-VIDEO IN
on the rear of your television and the other ends to
corresponding video or S-Video out connectors on the A/V device.
◆
Connect RCA audio cables to AUDIO (L/R) IN on the rear of your television and the other ends to corresponding audio out
connectors on the A/V device.
6
Connecting to the RCA Output
The RCA output connectors are used for equipment, such as a recording VCR or audio system
◆
When you wish to record a programme;
Connect RCA video cable to
VIDEO OUT on the rear of your television and the other ends to corresponding video in
connectors on the A/V device.
Connect RCA audio cables to
AUDIO (L/R) OUT on the rear of your television and the other ends to corresponding audio
in connectors on the A/V device.
◆
When you wish to connect an audio system;
Connect RCA audio cables to
AUDIO (L/R) OUT
on the rear of your television and the other ends to corresponding audio
in connectors on the Amplifier or DVD Home Theater.
AA68-03786A-X0Eng_ﾁﾟｾﾆﾇ秬ﾃﾖﾁｾ.indd 6 2006-05-26 ｿﾀﾀ・9:17:36