5
EN
Place the oven on a flat level surface 85cm above the floor. The surface should
be strong enough to safety bear the weight of the oven.
When you install your oven, make sure there is adequate ventila-
tion for your oven by leaving at least 10 cm (4 inches) of space
behind and, on the sides of the oven and 20 cm (8 inches) of
space above.
Remove all packing materials inside the oven.Install the roller
ring and turntable. Check that the turntable rotates freely.
This microwave oven has to be positioned so that plug is accessible.
Note
●If the supply cord is damaged, it must be replaced by a special cord or assembly available
from the manufacturer or its service agent. For your personal safety, plug the cable into a
3-pin, 230 Volt, 50Hz, AC earthed socket. If the power cable of this appliance is damaged, it
must be replaced by a special cable.
●Do not install the microwave oven in hot or damp surroundings like next to a traditional oven
or radiator. The power supply specifications of the oven must be respected and any exten-
sion cable used must be of the same standard as the power cable supplied with the oven.
Wipe the interior and the door seal with a damp cloth before using your microwave oven for
the first time.
Installing Your Microwave Oven
20cm
above
10cm
behind
10cm on
the side
85cm of
the floor
CQ138_XTL-03437B-02_EN.indd 5
2008-03-05 ソタタ・9:17:43