EN
5
Cooking / Reheating (continued)
Whilst heating, one press on
pad stops the oven. You can restart it
by pressing the
pad or a second press on
pad will cancel the
selected program. When it is NOT in a heating cycle, one tap on
pad cancels the selected program. You can set the power level first
and then the cooking time next, or vice versa. You can press +20sec
button one or more times in order to add the cooking time by 20
seconds.
When heating cycle is completed and you open the door, the oven
lamp automatically turns on and goes off 1 min later.
When you open the door whilst in a heating cycle, the oven stops
operating and the oven lamp automatically turns on for 1 min and
goes off 1 min later. If you leave the oven door open for more than 1
min, the oven beeps once every minute and after 5 min the power
source check indicator ‘ON’ appears in the display window.
When in a heating cycle, you can not change the power level or
heating time. But you can add 20 sec increments using the +20sec
pad. The dial may be rotated but this does not affect the current
operation and the display remains the same. It becomes effective next
time you set the oven manually after you finish the current heating. If
you want to change the current setting, firstly stop the heating by
using CANCEL pad and set desired power level and cooking time
again.
But when you are NOT in a heating cycle, you can change the power
level and heating time. Changed values are promptly shown in the
display.
The oven is designed not to work when power level is set to “0” mode
between the heating mode and the defrosting mode.
When you first plug in the power cord, the oven beeps once and all
the indicators show for 5 sec in the display window.
Power Levels and Time Variations
The power level function enables you to adapt the amount of energy
dissipated and thus the time required to cook or reheat your food,
according to its type and quantity. You can choose between the power
levels below.
The cooking times given in recipes and in this booklet correspond to
the specific power level indicated.
The maximum time available per power level is shown in the table
above.
A defrosting time can be set up to 50 min. But the time is reduced to
25 min (for HIGH) or 40 min (for MEDIUM or LOW) the moment you
change the current power level (DEFROST) to other level such as
HIGH, MEDIUM or LOW.
Example: If you set a defrosting time to 45min with the heating mode at
DEFROST and if you change the power level to HIGH, the time will
be automatically reduced to 25min.
You can set the power level first and the cooking time next, and vice
versa.
Power Level
CM1919A
CM1619A
CM1319A
Percen-
tage
Output Percen-
tage
Output Percen-
tage
Output
HIGH (
)
MEDIUM (
)
LOW (
)
HIGH DEFROST (
)
LOW DEFROST (
)
100 %
70 %
50 %
20 %
10 %
1850 W
1295 W
925 W
370 W
185 W
100 %
70 %
50 %
25 %
13 %
1600 W
1120 W
800 W
400 W
208 W
100 %
70 %
50 %
30 %
15 %
1300 W
910 W
650 W
390 W
195 W
Power Level
Max. Time
HIGH (
)
MEDIUM (
)
LOW (
)
HIGH DEFROST (
)
LOW DEFROST (
)
25 min.
40 min.
40 min.
50 min.
50 min.
jtX`X`hl|TWYZ\WiluUGGwG\GGt SGq GY_SGYWW_GGXXa\\Ght
Содержание CM1919A
