EN
9
Memory Pads Programming
One-stage
1.
Hold down
PROGRAM LOCK
(
) and then press
PROGRAM
(
) pad. Hold together for 2 sec.
Be sure to press the pads firmly.
Result :
PROG indicator appears in the digital display.
2.
Press appropriate
NUMBER
pad for the desired memory
number.
Result :
Selected memory program code appears
below the PROGRAM indicator.
3.
Select power level by pressing the
POWER LEVEL
pad or
DEFROST
pad.
Result :
Default power level HIGH appears in the
display at first press of the
POWER LEVEL
pad.
Press the
POWER LEVEL
pad or
DEFROST
pad one or more times until you get the desired
power level.
4.
Press
NUMBER
pads to set the cooking time.
The maximum time according to each cooking
power level can be referred to in the title “Power
Levels and Time Variations” on page 7. The
NUMBER
pads will not operate or respond when
you press a cooking time exceeding the
maximum value.
It is not possible to set a cooking time for longer
than the maximum time allowed on the chosen
program. It is advisable to press
CANCEL
and to
enter a new power level and cooking time.
5.
Hold down
PROGRAM LOCK
(
) and then press
PROGRAM
(
) pad. Hold together for 2 sec once again.
Result :
PROG indicator and memory number indicator
blink 3 times in the digital display with a beep
sound. And then the display goes blank.
Caution: Be sure to press the pads firmly in the right
position.
6.
When you want to program more, repeat the procedures
above again.
Memory programs are available up to 30 items.
Make sure the unit is properly programmed.
After programming is finished, all you have to do
for memory cooking is to press the
NUMBER
pad. Then the selected memory program
automatically starts cooking.
jtX`Y`hl|TWYZ[`iluUGGwG`GGm SGqG_SGYWW^GGYaZ[Gwt
