EN
6
Cooking / Reheating (continued)
Whilst in a heating cycle, one press on
pad stops the oven. At this
time, the Power Check Indicator “ON” starts blinking and goes off
when the
pad or
button is pressed again.
You can restart it by pressing the
button or a second press on
pad will cancel the selected program. While NOT in a heating cycle,
one tap on
pad cancels the selected program.
You can press +20sec pad one or more times in order to add the
cooking time by 20 seconds. But you can not exceed the maximum
time per power level allowed for power level selected.
When you first plug in the power cord, the oven beeps once and all
the indicators show for 5 sec in the display window.
When heating cycle is completed and you open the door, the oven
lamp automatically turns on and goes off 1 min later.
When you open the door whilst in a heating cycle, the oven stops
operating and the oven lamp automatically turns on for 1 min and
goes off 1 min later. If you leave the oven door open for more than 1
min, the oven beeps once every minute and after 5 min the power
source check indicator ‘ON’ appears in the display window.
Multi-stage cooking
You can not set up the same
POWER LEVEL
or
DEFROST
.
It operates as setting up sequence.
1.
Select the desired power level by pressing the
POWER
LEVEL
Selector pad or
DEFROST
pad.
Result :
The selected power level will be displayed in
the display window.
2.
Set the desired heating time by pressing the
NUMBER
pads.
Result :
The selected time is displayed in the display
window.
The maximum time according to each cooking
power level can be referred to in the title “Power
Levels ans Time Variations”. The
NUMBER
pads
will not operate or respond when you press a
cooking time exceeding the maximum value. It is
not possible to set a cooking time for longer than
the maximum time allowed on the chosen
program. It is advisable to press
CANCEL
and to
enter a new power level and cooking time.
3.
Repeat steps 1 and 2 for
II
or
III
stage memory
programming.
4.
Press
button:
Result :
The oven lamp and cooling fan will be turned
on. The oven will automatically start heating
according to pre-programed cooking time and
power level.(I stage
II stage
III stage).
The time on digital display will count down.
jtX`Y`hl|TWYZ[`iluUGGwG]GGm SGqG_SGYWW^GGYaZ[Gwt
