19
ENGLISH
USING THE DOUBLE QUANTITY BUTTON
1.
Hold down
CANCEL
(
)
and then press ( ) pad.
Hold together for 2 seconds.
2.
Select desired program code by using
NUMBER
pads.
3.
Press
NUMBER
pads to set the magnification
factor within the range from 1.00 to 9.99.
Default factor is 1.65 preset from the
manufacturer for increasing the cooking time.
Make sure that you set a correct factor between 1.00 and 9.99 for
each memory code number.
4.
Press the
Start
(
) button.
Press
CANCEL
(
) pad to exit the programming
mode.Though you can successfully set a double
quantity factor whose setting might result in
excess of the maximum time allowed for each power level, the oven
does not operate exceeding the maximum time.
DOUBLE QUANTITY PAD PROGRAMMING
Double Quantity Factor Editing
Feature
Key Entry
Display
Remark
Double
Quantity
Factor
Edit
Hold down (
) and
then
( ) pad
Hold down for 2 sec.
Code No.
After 1 sec, default value
shows in the display
window.
(Input desired factor
value.)
1.00 ~ 9.99 available
(Change the factor if
required.)
START(
)
If you don’t want to
change more, press
CANCEL to exit the
editing mode.
New Code No.
Skip this step if not
necessary.
(Input factor value)
Skip this step if not
necessary.
START(
)
Skip this step if not
necessary.
CANCEL(
)
(Mode cancel)
This exits the editing
mode.
CM1029_XEU_DE68-2570B-01_EN.indd 19
11/18/2013 7:27:45 PM
