13
ENGLISH
COOKING/REHEATING
One Stage Cooking
This oven is preset at the factory for automatic operation.
Make sure the oven is plugged into a properly earthed electrical outlet
and “ON” appears in the display window.
Open the door(The oven lamp will be turned on.).
Put the food into a suitable container, place it in the centre of the oven
and then close the door securely (The oven lamp will go off.).
1.
Select the desired power level by pressing the
PowerLevel Selector
pad.
Result :
The selected power level will be
displayed in the display window.
2.
Select the desired heating time by pressing the
NUMBER
pads.
Result :
The selected time is displayed in the
display window.
The maximum time according to each cooking power level can be
referred to in the title “Power Levels ans Time Variations” on page 6.
The
NUMBER
pads will not operate or respond when you press a
cooking time exceeding the maximum value. It is not possible to set a
cooking time for longer than the maximum time allowed on the chosen
program. It is advisable to press
CANCEL
and to enter a new power
level and cooking time.
3.
Press the (
)button:
Result :
The oven lamp and cooling fan will be
turned on. Heating will start. The time
on digital display will count down.
When all time is elapsed, the end of cycle Beep Tone will sound 4
times and all heating will stop. The oven lamp will go off. For 1 min, the
display shows ‘0‘ and the cooling fan will keep working in order to cool
down the interior parts. During the time, the fan will not stop even when
you open the door. 1 min later it will stop. Food may be removed from
oven whilst the fan is still running.
4.
Open the door and take the food out. Close the door. The oven lamp will
go off.
Whilst in a heating cycle, one press on
pad stops the oven. At this
time, the Power Check Indicator “ON” starts blinking and goes off when
the
pad or
button is pressed again. You can restart it by pressing
the
button or a second press on
pad will cancel the selected
program. While NOT in a heating cycle, one tap on
pad cancels the
selected program. You can press +30sec pad one or more times in
order to add the cooking time by 30 seconds. But you can not exceed
the maximum time per power level allowed for power level selected.
When you first plug in the power cord, the oven beeps once and all the
indicators show for 5 sec in the display window.
When heating cycle is completed and you open the door, the oven
lamp automatically turns on and goes off 1 min later.
When you open the door whilst in a heating cycle, the oven stops
operating and the oven lamp automatically turns on for 1 min and goes
off 1 min later. If you leave the oven door open for more than 1 min, the
oven beeps once every minute and after 5 min the power source check
indicator ‘ON’ appears in the display window.
CM1029_XEU_DE68-2570B-01_EN.indd 13
11/18/2013 7:27:43 PM
