Samsung CM1019, Руководство по обслуживанию

Страница: 18 / 42

17
Samsung Electronics
1. Remove the outer panel and back-cover.
2. Discharge the high voltage capacitor.
3. Remove all the lead wires from Magnetron and
High Voltage Capacitor.
4. Remove 2 screws securing the duct fan.
5. Remove 2 screws securing the Supporter-Fan-
Mount.
6. Lift the Fan Motor AssÕy slightly left and pull it
out.
7. Remove lead wires and connectors.
8. Turn the fan motor assÕy over so that the
bracket side is up.
9. Remove 2 screws securing the Fan Motor.
NOTE: You donÕt need to remove the outer panel
or other parts in order to replace a lamp.
1. Remove a screw securing the lamp cover.
2. Remove the lamp by rotating it clockwise.
3. Replace with a new lamp by rotating it counter-
clockwise.
NOTE : If it is necessary to replace the lamp
holder, you can disconnect lead wires by
pushing down on the hole of lead wires
using a long pointed tool.
1. Open the door.
2. Remove the tray by inserting a thin metal tool into
the gap between the oven wall and the tray silicon
cover.
3. Insert the new tray by tilting it across the oven
cavity.
4. Firstly fix the front part (refers to the place where
the silicon cover is thinner than the other 3 edges)
and then place the backward part carefully and
firmly.
NOTE: Be careful when you handle the tray since it
is fragile.
Lamp Holder
Tray
Supporter-Fan-Mount
Duct-Fan
Fan Motor
Lamp Cover
Outer Panel
Disassembly and Reassembly
4-7 Replacement of Fan Motor
4-8 Replacement of Tray
4-9 Replacement of Lamp