Samsung CLX 3160FN - Color Laser - All-in-One Скачать руководство пользователя страница 107

Страница: 107 / 204

Samsung Electronics

Service Manual

Alignment and Adjustmens

6-8

6.3.2.3 In the mamual tray

1. Pull the tray 1 out.

2. Push the manual tray tab down.

3. Pull the Jammed paper out of the manual tray.

4. Insert the tray 1 into the machine until it snaps

into place. Printing automatically resumes.

6.3.2.4 In the paper exit area

1. Open and close the front cover. The jammed

paper is automatically ejected from the
machine.

2. Gently pull the paper out of the output tray.

If you do not see the jammed paper or if there
is any resistance when you pull, stop and go to
the next step.

3. Open the rear cover.

4. If you see the jammed paper, pull it straight up.

Skip to step 8.

If you still do not see the paper, go to the next
step.

Содержание CLX 3160FN - Color Laser - All-in-One













































































































































































































Результаты поиска

Содержание CLX 3160FN - Color Laser - All-in-One

Отзывы:

Похожие инструкции для CLX 3160FN - Color Laser - All-in-One

Бренды по названию

Популярные бренды

Samsung CLX 3160FN - Color Laser - All-in-One, Руководство по обслуживанию

Результаты поиска

Содержание CLX 3160FN - Color Laser - All-in-One

Отзывы:

Похожие инструкции для CLX 3160FN - Color Laser - All-in-One

Бренды по названию

Популярные бренды