Samsung CLP-775ND, Руководство пользователя

Страница: 35 / 101

Network setup _ 35
below:
- IP address: 169.254.133. 43
- Subnet Mask: 255.255.0.0 (Use the computer’s subnet
mask.)
- Gateway: 169.254.133. 1
9. When the wireless network settings are completed, disconnect the
USB cable between the computer and machine. Click Next .
If the Change PC Network Setting window appears, follow
the steps in the window.
Click
Next if you are finished with the computer’s wireless
network settings.
If you set the computer’s wireless network on DHCP, it will take
several minutes to receive the IP address.
10. The Wireless Network Setting Complete window appears.
Select Yes if you accept the current settings and continue the setup
procedure.
Select
No if you want to return to the beginning screen.
Then, click Next .
11. Click Next when the Confirm Printer Connection window appears.
12. Select the components to be installed. Click Next .
13. After selecting the components, you can also change the machine
name, set the machine to be shared on the network, set the machine
as the default machine, and change the port name of each machine.
Click Next .
14. After the installation is finished, a window asking you to print a test
page appears. If you want to print a test page, click Print a test
page .
Otherwise, just click Next and go to step 1
6
.
15. If the test page prints out correctly, click Yes .
If not, click No to reprint it.
16. To register as a user of the machine in order to receive information
from Samsung, click On-line Registration .
17. Click Finish .
Setup using Macintosh
Items to prepare
• Access point
• Network-connected computer
• Software CD that was provided with your machine
• The machine installed with a wireless network interface
• USB cable
Access point via USB cable
1. Check whether the USB cable is connected to the machine.
2. Turn on your computer, access point, and machine.
3. Insert the supplied software CD into your CD-ROM drive.
4. Double-click the CD-ROM icon that appears on your Macintosh
desktop.
5. Double-click the MAC_Installer folder.
6. Double-click the Installer OS X icon.
7. Enter the password and click OK .
8. Click Continue .
9. Read the license agreement and click Continue .
10. Click Agree to agree to the license agreement.
11. Click Continue .
12. Select Easy Install and click Install . Easy Install is recommended
for most users. All components necessary for machine operations
will be installed.
If you select
Custom Install , you can choose which individual
operations will be installed.
13. Select the Wireless Setting and Installation option.
14. The software searches the wireless network.
If the search has failed, you may check if the USB cable is
connected between the computer and machine properly, and
follow the instructions in the window.
15. After searching, the window shows the wireless network devices.
Select the name (SSID) of the access point you are using and click
Next .
When you set the wireless configuration manually, click
Advanced Setting .
• Enter the wireless Network Name: Enter the SSID of the
access point you want with (SSID is case-sensitive).
• Operation Mode: Select Infrastructure .
• Authentication: Select an authentication type.
Open System: Authentication is not used, and encryption
may or may not be used, depending on the need for data
security.
Shared Key: Authentication is used. A device that has a
proper WEP key can access the network.
WPA Personal or WPA2 Personal: Select this option to
authenticate the print server based on WPA Pre-Shared
Key. This uses a shared secret key (generally called Pre-
Shared Key pass phrase) that is manually configured on
the access point and each of its clients.
• Encryption: Select the encryption. (None, WEP64,
WEP128, TKIP, AES, TKIP, AES)
• Network Key: Enter the encryption network key value.
• Confirm Network Key: Confirm the encryption network
key value.
• WEP Key Index: If you are using WEP Encryption, select
the appropriate WEP Key Index .
The wireless network security window appears when the
access point has security setting.
The wireless network security window appears. The window
may differ according to its security mode: WEP or WPA.
• WEP
Select Open System or Shared Key for the authentication
and enter the WEP security key. Click Next .
WEP (Wired Equivalent Privacy) is a security protocol
preventing unauthorized access to your wireless network.
WEP encrypts the data portion of each packet exchanged
on a wireless network using a 64-bit or 128-bit WEP
encryption key.
• WPA
Enter the WPA shared key and click Next .
WPA authorizes and identifies users based on a secret key
that changes automatically at regular intervals. WPA also
uses TKIP (Temporal Key Integrity Protocol) and AES
(Advanced Encryption Standard) for data encryption.
16. The window shows the wireless network settings and check if
settings are right. Click Next .
• For the DHCP method