Samsung CLP-510 - Color Laser Printer Скачать руководство пользователя страница 3

Страница: 3 / 266

ETUP

UIDE

English

Step 1.

Unpacking

Remove the printer and all of the accessories from the
packing carton. Make sure that the printer has been packed

with the following items:

OTES

• If any items are missing or damaged, notify your dealer

immediately.

• Components may differ from one country to another.
• The CD-ROM contains the printer driver, the User’s Guide, and

the Adobe Acrobat Reader program.

• The power cord may be different depending on your country.

AUTION

: This printer weighs 32kg including developer cartridge

and cassette. Use safe lifting and handling techniques. If you need

to move the printer it should be moved by two people. Use the

lifting handles located, as shown in the diagram (see page 5). Back

injury could result if a single person attempts to lift the printer.

Toner Cartridges

Power Cord

Quick Install Guide

CD-ROM

Optimum Setup Guide

SyncThru CD-ROM

(CLP-510N only)

SyncThru Quick Guide

(CLP-510N only)

Содержание CLP-510 - Color Laser Printer











































































































































































































































































Результаты поиска

Содержание CLP-510 - Color Laser Printer

Отзывы:

Бренды по названию

Популярные бренды

Samsung CLP-510 - Color Laser Printer, Руководство по установке

Результаты поиска

Содержание CLP-510 - Color Laser Printer

Отзывы:

Бренды по названию

Популярные бренды