Samsung CLP-510 - Color Laser Printer Скачать руководство пользователя страница 188

Страница: 188 / 266

OLVING

ROBLEMS

7.21

Tips for Avoiding Paper Jams

By selecting the correct paper types, most paper jams can be

avoided. If a paper jam occurs, follow the steps outlined in

“Clearing Paper Jams” on page 7.6.

• Follow the procedures on page 3.4. Ensure that the adjustable

guides are positioned correctly.

• Do not overload the paper tray. Ensure that the paper is below

the paper limit mark on the inside wall of the tray.

• Do not remove the paper from the tray while printing.

• Flex, fan, and straighten the paper before loading.

• Do not use creased, damp, or highly curled paper.

• Do not mix paper types in a tray.

• Use only recommended print materials. See “Paper

Specifications” on page E.4.

• Ensure that the print side is facing down when loading paper

in a tray and in the Multi-purpose Tray.

Содержание CLP-510 - Color Laser Printer











































































































































































































































































Результаты поиска

Содержание CLP-510 - Color Laser Printer

Отзывы:

Бренды по названию

Популярные бренды

Samsung CLP-510 - Color Laser Printer, Руководство по установке

Результаты поиска

Содержание CLP-510 - Color Laser Printer

Отзывы:

Бренды по названию

Популярные бренды