Wireless network setup (CLP-325W(K) only)
_ 39
•
Authentication:
Select an authentication type.
Open System:
Authentication is not used, and encryption
may or may not be used, depending on the need for data
security.
Shared Key:
Authentication is used. A device that has a
proper WEP key can access the network.
WPA Personal or WPA2 Personal:
Select this option to
authenticate the print server based on WPA Pre-Shared
Key. This uses a shared secret key (generally called Pre
Shared Key pass phrase) which is manually configured on
the access point and each of its clients.
•
Encryption:
Select the encryption. (None, WEP64,
WEP128, TKIP, AES, TKIP AES)
•
Network Key:
Enter the encryption network key value.
•
Confirm Network Key:
Confirm the encryption network
key value.
•
WEP Key Index:
If you are using the WEP Encryption,
select the appropriate
WEP Key Index
.
The wireless network security window does appear when the
access point has security setting.
The wireless network security window appears. The window
may differ according to its security mode, WEP or WPA.
•
In case of WEP
Select
Open System
or
Shared Key
for the authentication
and enter WEP security key. Click
Next
.
WEP (Wired Equivalent Privacy) is a security protocol
preventing unauthorized access to your wireless network.
WEP encrypts the data portion of each packet exchanged
on a wireless network using a 64-bit or 128-bit WEP
encryption key.
•
In case of WPA
Enter the WPA shared key and click
Next
.
WPA authorizes and identifies users based on a secret key
that changes automatically at regular intervals. WPA also
uses TKIP (Temporal Key Integrity Protocol) and AES
(Advanced Encryption Standard) for data encryption.
8.
The window shows the wireless network setting and check if settings
are right. Click
Next
.
•
For the DHCP method
If the IP address assignment method is DHCP, check if DHCP is
shown in the window. However, if it shows Static, click
Change
TCP/IP
to change the assignment method to DHCP.
•
For the Static method
If the IP address assignment method is Static, check if Static is
shown in the window. However, if it shows DHCP, click
Change
TCP/IP
to enter the IP address and other network configuration
values for the machine. Before entering the IP address for the
machine, you must know the computer’s network configuration
information. If the computer is set to DHCP, you must contact the
network administrator to get the static IP address.
Example)
If computer’s network information is as below:
-
IP address: 169.254.133.42
-
Subnet Mask: 255.255.0.0
Machine’s network information should be as below:
-
IP address: 169.254.133. 43 (Use computer’s IP address,
with changed last three digits.)
-
Subnet Mask: 255.255.0.0 (Use the computer’s subnet
mask.)
-
Gateway: 169.254.133.1 (Change the last three digits from IP
address of your machine to 1.)
9.
When the wireless network setting is completed, disconnect the USB
cable between the computer and machine. Click
Next
.
10.
The
Wireless Network Setting Complete
window appears.
Select
Yes
if you accept the current settings and continue the setup
procedure.
Select
No
if you want to return to the beginning screen.
Then, click
Next
.
11.
Click
Next
when the
Confirm Printer Connection
window appears.
12.
Select the components to be installed. Click
Next
.
After selecting the components, you can also change the machine
name, set the machine to be shared on the network, set the machine
as the default machine, and change the port name of each machine.
Click
Next
.
13.
After the installation is finished, a window asking you to print a test
page appears. If you want to print a test page, click
Print a test
page
.
Otherwise, just click
Next
and go to step 15.
14.
If the test page prints out correctly, click
Yes
.
If not, click
No
to reprint it.
15.
To register as a user of the machine in order to receive information
from Samsung, click
On-line Registration
.
16.
Click
Finish
.
Installing the machine on an Ad-Hoc wireless
network (Windows)
If you do not have an access point (AP), you may still connect the machine
wirelessly to your computer by setting up an Ad-Hoc wireless network by
following the simple steps below.
Items to prepare
Ensure you have next items ready.
•
Network-connected computer
•
Software CD that provided with your machine
•
The machine installed with a wireless network interface
•
USB cable
Creating the Ad-Hoc network in Windows
When the items are ready, follow below steps:
1.
Check whether the USB cable is connected to the machine.
2.
Turn on your computer and the wireless network machine.
3.
Insert the supplied software CD into your CD-ROM drive.
•
The software CD should automatically run and an installation
window appear.
•
If the installation window does not appear, click
Start
and then
Run
. Type X:\
Setup.exe
, replacing “X” with the letter which
represents your drive. Click
OK
.
•
If you use Windows Vista, Windows 7 or Windows Server 2008
R2 click
Start
>
All programs
>
Accessories
>
Run
.
Type X:\
Setup.exe
replacing “X” with the letter which represents
your drive and click
OK
.
•
If the
AutoPlay
window appears in Windows Vista, Windows 7 or
Windows Server 2008 R2, click
Run Setup.exe
in
Install or run
program
field, and click
Continue
or
Yes
in the
User Account
Control
window.
Содержание CLP-320K
Страница 14: ...Regulatory information_ 14 CHINA ONLY ...
Страница 55: ...Media and tray_ 55 ...
