4-3 Replacement of High Voltage Transformer
4-4 Replacement of Door Assembly
4-2
Samsung Electronics
1. Discharge the high voltage capacitor.
(See page 1-2)
2. Disconnect all the leads.
3. Remove four screws.
4. When replacing, connect the leads securely.
1. Remove bolts securing the upper hinge and
lower hinge, then remove the door assmbly.
2. After replacing the door, check the operation
of the primary interlock switch, the secondary
interlock switch and the interlock monitor
switch.
3. Microwave emission should not exceed
5
§ /§†
(All service adjustments should be
made for minimum RF emission.)
Disassembly and Reassembly
H.V.TRANS
H.V.FUSE
HINGE UPPER
HINGE VOLT
HINGE VOLT
H.V.CAPACITOR
