Samsung CE1180GBC, Инструкция пользователя

Страница: 4 / 32

4
EN
Accessories
Depending on the model that you have purchased, you are supplied
with several accessories that can be used in a variety of ways.
Using this Instruction Booklet
Thank you for purchasing a SAMSUNG microwave oven. Your
Owner’s Instructions contains much valuable information on cooking
with your new microwave oven:
• Safety precautions
• Accessories and cookware
• Useful cooking tips
Inside the cover you will find a quick look-up guide explaining three
basic cooking operations:
• Cooking (microwave mode)
• Defrosting
• Adding an extra 30 seconds, if the dish is inadequately cooked or
requires additional reheating
At the end of the booklet you will find illustrations of the oven, and
more importantly the control panel, so that you can find the buttons
more easily.
The illustrations in the step-by-step procedures use two different
symbols.
PRECAUTIONS TO AVOID POSSIBLE EXPOSURE TO
EXCESSIVE MICROWAVE ENERGY
Failure to observe the following safety precautions may result in harmful exposure to
microwave energy.
(a) Under no circumstances should any attempt be made to operate the oven with
the door open or to tamper with the safety interlocks (door latches) or to insert
anything into the safety interlock holes.
(b) Do not place any object between the oven door and front face, or allow food or
cleaner residues to accumulate on sealing surfaces. Ensure that the door and
door sealing surfaces are kept clean by wiping after use with first a damp cloth
and then a final wipe with a soft dry cloth.
(c) Do not operate the oven if it is damaged until it has been repaired by a
qualified microwave service technician trained by the manufacturer.
It is particularly important that the oven door closes properly and that there is no
damage to the:
(1) Door, door seals and sealing surfaces
(2) Door hinges (broken or loose)
(3) Power cable
(d) The oven should not be adjusted or repaired by anyone other than a properly
qualified microwave service technician trained by the manufacturer.
1. Coupler , to be placed correctly over the motor shaft in the
base of the oven.
Purpose:
The coupler rotates the turntable.
2. Roller ring , to be placed in the center of the oven.
Purpose: The roller ring supports the turntable.
3. Turntable , to be placed on the roller ring with the center
fitting on to the coupler.
Purpose:
The turntable serves as the main cooking
surface; it can be easily removed for cleaning.
4. Metal racks (High rack, Low rack), to be placed on the
turntable.
Purpose:
The metal racks can be used to cook two
dishes at the same time. A small dish may be
placed on the turntable and a second dish on
the rack.
The metal racks can be used in
grill, convection and combination cooking .
☛ ✉
Important Note
jlXX_Wn~j†zhTWZW][}†luU”GGwˆŽŒG[GG{œ™š‹ˆ SGqœ•ŒGX]SGYWW\GGXXaZXGht