9
ENGLISH
ACCESSORIES
Depending on the model that you have purchased, you are supplied with
several accessories that can be used in a variety of ways.
1. Coupler
, to be placed correctly over the motor shaft
in the base of the oven.
Purpose:
The coupler rotates the turntable.
2. Roller ring
, to be placed in the center of the oven.
Purpose:
The roller ring supports the turntable.
3. Turntable
, to be placed on the roller ring with the
center fitting on to the coupler.
Purpose:
The turntable serves as the main
cooking surface; it can be easily
removed for cleaning.
4. High rack, Low rack,
to be placed on the turntable.
Purpose:
The metal racks can be used to cook
two dishes at the same time. A small
dish may be placed on the turntable
and a second dish on the rack.
The
metal racks can be used in grill,
convection and combination
cooking.
5. Clean water bowl
, to be placed in the right side of
the oven.
Purpose:
The water bowl can be used to clean
.
6. Crust plate
, to be placed on the turntable.
Purpose:
The crust plate is used to brown botton
of food by using the microwave or grill
combination cooking modes and to
keep pastry and pizza dough crispy.
7. Roasting spit, coupler barbecue and Skewer
to
be placed in the glass bowl.
Purpose:
The roasting spit is a convenient of
barbecuing a chicken, as the meat
does not have to be turned over. It can
be used for grill combination cooking.
8. Glass bowl,
to be placed on the turntable.
Purpose:
Roasting stand is placed on the glass
bowl.
INSTALLING YOUR MICROWAVE OVEN
Place the oven on a flat level surface 85 cm above the floor. The surface
should be strong enough to safely bear the weight of the oven.
1.
When you install your oven, make sure there is
adequate ventilation for your oven by leaving at least
10 cm (4 inches) of space behind and, on the sides
of the oven and 20 cm (8 inches) of space above.
2.
Remove all packing materials inside the oven.
Install the roller ring and turntable.
Check that the turntable rotates freely.
3.
This microwave oven has to be positioned so that plug is accessible.
If the supply cord is damaged, it must be replaced by a special cord or
assembly available from the manufacturer or its service agent.
For your personal safety, plug the cable into a 3-pin, 230 Volt, 50 Hz,
AC earthed socket. If the power cable of this appliance is damaged, it
must be replaced by a special cable.
Do not install the microwave oven in hot or damp surroundings like
next to a traditional oven or radiator. The power supply specifications
of the oven must be respected and any extension cable used must
be of the same standard as the power cable supplied with the oven.
Wipe the interior and the door seal with a damp cloth before using your
microwave oven for the first time.
10 cm
behind
20 cm
above
10 cm on
the side
85 cm of
the floor
CE117PFC-X_SWS_DE68-04003P_EN.indd 9
2012-07-12 �� 4:39:36
