19
Installation
Attaching the Stand (Type one)
―
Before assembling the product, place the product down on a flat and stable surface so that the screen is facing downwards.
: The product is curved. Placing pressure on the product when on a flat surface may damage the product. When the product is on the ground facing up or down, do not put pressure on it.
11
12
13
Caution
Hold the stand neck with both hands, not one
hand, to prevent it from falling off and causing
injury.
Remove the Cushion Top and Cushion Front, and then
place the Cushion Front on the desk.
Pull the monitor out of the package (two people
are required for this work), and then place the
monitor on the Cushion Front.
Place the stand neck on the monitor as shown
in the figure.
14
15
16
17
Fasten the screws at the top of the stand neck.
Insert the stand base into the stand neck in the
direction as shown in the figure.
Disassemble the COVER-REAR TOP.
Assemble the COVER-REAR TOP to the stand
neck as shown in the figure.
18
Rotate the COVER-REAR TOP clockwise.
