Samsung Bixolon SRP-500, Руководство по управлению

Страница: 16 / 27

Rev. 1.00
- 16 -
SRP-500
[Notes]
The command is enabled only when input at the beginning of the line.
A portion of data skipped by means of HT is also target data for the justification
function.
[Default] n = 0
[Example]
Left justification Centering Right justification
ABC
ABCD
ABCDE
ABC
ABCD
ABCDE
ABCC
ABCDC
ABCDEC
ESC c 3 n
[Name] Select paper detector(s)to output paper end signals
[Format] ASCII ESC c 3 n
Hex 1B 63 33 n
Decimal 27 99 51 n
[Range] 0 ≤ n ≤ 255
[Description] Selects paper detector(s) to output paper end signals, using n as
follows:
Bit Off/On Hex Decimal Function
Off 00 0 Paper roll near end sensor disabled. 0
On 01 1 Paper roll near end sensor enabled.
1 Off 00 0 Paper roll near end sensor disabled.
On 02 2 Paper roll near end sensor enabled.
Off 00 0 Paper roll end detector disabled. 2
On 04 4 Paper roll end detector enabled.
Off 00 0 Paper roll end detector disabled. 3
On 08 8 Paper roll end detector enable.
4 - - - Undefined
5 - - - Undefined
6 - - - Undefined
7 - - - Undefined
[Notes]
It is possible to select multiple detectors to output signals.
Then, if any of the detectors detects a paper end, the paper end signal is output.
Detectors are switched when executing this command.
Because of this, the paper-out signal switching may delay depending on the receive
buffer state.
[Default] n = 15