0
English
Setup
Before Starting (Initial Settings)
Turn on your TV after connecting the player.
(When you connect the player to a TV for the
first time, the player turns on automatically
and the Initial Settings screen appears.)
Press the ▲▼ buttons to select the desired
language, and then press the
ENTER
button.
Press the
ENTER
button to select
Start
.
Press the ▲▼ buttons to select the desired
TV Aspect Ratio, and then press the
ENTER
button. (See page 33)
1.
2.
3.
4.
Press the ◄► buttons to select the desired
Network Settings :
Wired
,
Wireless
or
PBC
(WPS)
, and then press the
ENTER
button.
If you do not know your Network Settings,
press the
BLUE (D
) button on your remote
instead to skip Network Settings here, finish
the Initial Settings, and go to the Home menu.
If you selected a Network Setting, go to
pages 39~43 for more information about the
Network settings. When done, go to Step 6.
Press the
OK
button.
The home menu is displayed. (For more
information about home menu, please see
page 31)
Home Menu
NOTE
When the player is connected to TV for the first time,
the player turns on automatically.
This is not a malfunction.
The home menu will appear if you do not configure
the initial settings except as noted below.
If you press the
BLUE (D)
button during the network
setup, you can access the home menu even if the
network setup is not completed yet.
When you return to the Home menu, the full screen
mode is cancelled automatically.
If you want to display the Initial Setting screen again
to make changes, press the
STOP
( ) button on
the front panel of the player for more than 5 seconds
with no disc inserted.
If you use an HDMI cable to connect the player to an
(HDMI-CEC)
-compliant Samsung TV, you
have set the the
(HDMI-CEC)
feature to
On
in both the TV and the player.
If the TV uses a language supported by the player,
that language will be set as the preferred language
automatically.
5.
6.
•
✎
▪
▪
▪
▪
▪
▪
>
Move
"
Select
Initial Settings I On-Screen Language
Select a language for the on-screen displays.
English
Français
Deutsch
Español
Italiano
Nederlands
a
Previous
"
Select
Initial Settings
TV Aspect and Network will be set.
Each setting may be changed later under "Settings"
Start
a
Previous
d
Skip
<
Move
"
Select
Initial Settings I Network
Network Setting is needed to use various Internet services.
Choose the primary method for connecting to network.
Wired : Set the network connection using the Ethernet cable.
Please make sure that the Ethernet cable is connected.
Wired
Wireless
PBC (WPS)
internet radio
You Tube
No Disc
a
Change Device
d
View Devices
"
Enter
Please activate Internet@TV service
to enjoy a variety of Internet Services.
