Samsung B1045AGW/YLW, Руководство по обслуживанию

Страница: 10 / 50

9
5. MAIN FUNCTION
12) Unbalance detecting & laundry balance positioning system
① Just before the hydrating process and just after reversal rotation for balancing laundry position, this function is
carried out
② The initial 6 sec is the period of reversal rotation for balancing laundry position , Drum rotates 50rpm for
initial 6 sec
③ Next 12 sec, the rotation increases the speed from 50 rpm to 95 rpm slowly
④ During the next 8 sec, drum rotates at the speed of 95 rpm, the sensor decides the degree of laundry
unbalance with TACHO data which is attached to motor
⑤ If the degree of unbalanced laundry is over 6 times to default value, laundry balancing system carryies out
feed back process 3 times
13) R.P.M control
The rotating motor enables the magnetics( i.e generator) to generate magnetic flux in proportion to r.p.m,
magnetic flux induced by coil sensor in the opposite side produces the wave like the figure below to d
Φ /dt and
via rectangular wave generating circuit, the waves reaches MICOM and micom controls r.p.m with the pulse,
count and cycle inputted by program.
<COIL electrical wave at both ends> V (VOLT)
Vp
T (HOUR)
unbalance
detecting range
20 sec
laundry scattering
210rpm
Unbalance detectin g & laund ry balance positio nin g system
490rpm
500rpm
220rpm
95rpm