ENGLISH-10
Check before use
Using the filters
X
▶
Before you use the product for the first time, remove the plastic packaging from the 2-in-1 filter.
X
▶
If you operate the air purifier without the filters, you cannot expect any air purification effect .
X
▶
If the filter clean/replacement indicator (
sec
) blinks, replace the 2-in-1 filter .
(The 2-in-1 filter removes fine, invisible particles, gas and odor particles from the air . Postponing the filter clean/
replacement on the basis of a visual evaluation is not a desirable plan . The filter clean/replacement cycle is the maximum
usage period of the filter . The actual clean/replacement cycle may vary depending on the operating environment .)
X
▶
If a strange odor is coming from the product, the airflow from the product becomes weak or the recommended clean/
replacement cycle is reached, make sure to replace the 2-in-1 filter .
X
▶
Cleaning the Pre filter frequently improves the performance of the air purifier and helps keep the indoor air clean .
X
▶
For the installation order and how to install the filters, refer to the Inserting the filters section in the Cleaning and
Maintenance chapter .
X
▶
Before replacing the filters, make sure to turn off the power .
Removing the back cover of the product
Hold the left and right edges of the back cover, pull it forward
slightly (
①
) and then lift it up (
②
) to separate it .
Dust sensor
Gas sensor
①
②
Mounting the back cover of the product
Insert the hooks of the back cover into the
grooves at the bottom of the main body (
①
)
and press the edges of the back cover so that it
fits into 8 holes (
②
) of the main body .
X
f
If the hooks of the back cover is not
properly locked into the grooves, back
cover can not be assembled properly .
①
②
Back
cover
Specifications
Model
AX40T3020UW/NA
Dimensions
(Width × Height × Depth)
361 mm x 481 mm x 233 mm
Standard capacity
39 m
2
✻
✻
The design and specifications of the product are subject to change without notice for product improvement purposes .
