19
BASIC OPER
ATION
02
Remote controller display
On/Off timer
Settings
Options
Fan speed
3D fan
Wide fan
Low Battery
Time for timer option
Remote controller
transmission
※
This model does not support the Wifi function.
※
When the remote controller is turned off and turned on again, the last Timer, Options or Settings function which was
set before turning off the product is cancelled. However, the fan speed and Virus doctor operation remain.
Storing the remote controller
When you do not use the remote controller
for a long time, remove the batteries from the
remote controller and store it in the remote
controller holder.
Battery changing time
When the battery is exhausted, ( ) indicator will be
displayed on the remote controller display. When the icon
appears, change the batteries. The remote controller requires
two 1.5 V AAA type batteries.
Inserting the batteries
1. Open the battery cover of the remote controller.
- Press the (
) part gently and lift it up in the arrow
direction.
2. Insert the batteries.
- Check and match the (+) and (-) signs accordingly.
3. Close the battery cover.
- Match the cover and bottom part of the remote
controller and press it until you hear click sound.
CAUTION
• Make sure that water is not allowed to enter the remote controller.
NOTE
• Use the remote controller that is only for operation of the air purifier. When using the air conditioner remote
controller, the air purifier may not operate properly or the display on the remote controller is not the same as
actual operation of the air purifier.
• There is a possibility that the air purifier will not operate by the remote controller near strong light such as a
fluorescent lamp or neon sign. In this case, use the remote controller in front of the remote controller receiver
of the air purifier.
• If other electrical products operate by the remote controller, call your nearest service center.
ACR AF9000H-BIG NA_IB_04901A-02_EN.indd 19
2015-09-04 오전 10:36:26
