PREP
AR
ATION
01
13
Checking for filter replacement period
Check the filter monitor hole or filter reset indicator to replace the filter.
Filter replacement period can be checked with the filter reset indicator.
X
f
When the filter reset indicator (
) is turned on with alarm, replace the old deodorization/
HEPA filter (Integrated type) with new ones.
X
f
When you carry out the filter reset function after the filter is replaced, the alarm and the
(
) indicator will be turned off.
- When the filter reset indicator (
) is displayed, the alarm rings every time you turn on
the air purifier until you clear the filter reset indicator. (Refer to the 'Using the filter reset
function' p.27.)
X
f
The filter reset indicator is displayed according to the maximum operation hours of the
filter which is set regardless of surrounding environment. Therefore, the replacement
period can vary depending on the surrounding environment.
X
f
If a bad smell is generated or fan speed decreases, the filter should be replaced.
- Minor smell can be generated at the first use of the air purifier, but the smell will
disappear after the filter is used more than one day.
The pollution level of the filter can be checked.
X
f
You can check the pollution level of the HEPA filter (green) through the
filter monitor hole only when the lighting function is in operation.
X
f
Check the pollution level of the deodorization/HEPA filter (integrated type)
through the filter monitor hole on the side of the product.
- The pollution level of the filter can vary depending on the surrounding
environment.
- If the back of the filter monitor hole connected to the inside of the
filter is covered with dust, take out the filter and wipe the hole with a
superfine fiber cloth.
※
The HEPA filter (blue) at the lower part of the product cannot be checked
through the filter monitor hole. To check the pollution level, take out the
lower filter from the product.
X
f
Compare the pollution level of the filter with the colored label to decide
filter replacement.
- The colored labels are attached inside the filter frame.
(Upper part / 2 EA: green label, Lower part: blue label)
- As the filter is polluted, the color of the filter changes from green or blue
to gray.
Filter
monitor
hole
Rear hole
사용전
교체필요
Before usage
Change needed
使用前
需要更换
Green/
Blue
Gray
Product specification
Model name
AX1AH9000WK
Product size (WxHxD)
360 mm x 1890 mm x 327 mm
Bottom space for the product
(CA certified)
151.2 m
2
※
Design and product specification may change for quality improvement without advance notice.
ACR AF9000H-BIG NA_IB_04901A-02_EN.indd 13
2015-09-04 오전 10:36:23
