E-
9
Airing Your Room
If the atmosphere in your room is stale, you can air it using the Fan
feature and if necessary, evacuate the stale air outside.
If you wish to evacuate stale air outside, push the ventilation lever on the
front of the unit to the right and the open position (
).
Result:
The air inside the room circulates and stale air is evacuated
outside.
Otherwise, push the ventilation lever to the left and the closed position (
).
Result:
The air simply circulates inside the room.
If necessary, press the (On/Off) button.
Result:
The air conditioner starts up in the Cool mode.
The unit beeps twice.
3
If the FAN indicator is not lit up on the unit:
Press the
button on the remote control
or
Press the
button on the unit one or more times until the FAN
indicator lights up
Result:
The unit beeps each time you press the
/
button.
The air conditioner starts up in Fan mode.
You can change modes at any time.
When the air conditioner is in the Fan mode, the temperature is not
displayed; in this case, you do not need to set the temperature.
Remote Control
Control Panel
4
To set the fan speed to... Then...
Press the
,
or
button on the remote control as desired
or
Press the
button on the unit one or more times until the the
desired fan speed(F,F, or F3) is displayed.
: Low Speed
: Med Speed
: High Speed
5
To control the direction of the air flow, refer to page .
