E-
5
Selecting Energy Saving Mode
Temperature and Humidity Ranges
To select the Energy Saving mode, press the Energy Saver button on the remote
control or unit one or more times until the Energy Saver indicator lights up.
Result:
The fan and compressor cycle on and off together.
The fan will continue to run for a short time after the
compressor cycles off.
If you would like the air conditioner to run in
Dry
mode do not
press the Energy Saver button.You cannot use the
Dry
mode in
the Energy Saving mode.
To stop the Energy Saving mode, press the Energy Saver button on the
remote control or unit again.
Result:
The fan runs at all times, while the compressor cycles on and off.
If you select the Good Sleep mode in the Energy Saving mode,
the Energy Saving will be cancelled and the air conditioner will
start up in the Good Sleep mode.
If you wish to save Energy when using your air conditioner,
select the Energy Saving mode with the Energy Saver button.
Mode
IndoorTemperature
OutdoorTemperature
Indoor Humidity
Cooling
°C to 3°C approx.
°C to 54°C approx.
80% or less
The following table indicates the temperature and humidity ranges within which the
air conditioner can be used .
If the air conditioner is used at...
Then...
Higher temperatures
The automatic protection feature may be triggered and the air
conditioner stopped.
Lower temperatures
A water leakage or some other malfunction may happen if the
heat exchanger freezes.
Higher humidity levels
Water way condense on and drip from the surface of the unit if
it is used for long periods.
Remote Control
Control Panel
