manualshive.com logo in svg

Samsung AVXCSH023/032/040CE, Руководство по обслуживанию, Страница: 207 / 363

Поделиться
Скачать
Samsung AVXCSH023/032/040CE Скачать руководство пользователя страница 207

Troubleshooting

4-123

Samsung Electronics

4-4-29  

 : Compressor down by low pressure sensor protection control

Yes

Yes

No

Check the EEV.

No

Replace the Cond out sensor.

No

Open the sub valve.

No

All the sub valves open?

The Cond out sensor resistance normal?

(Refer to E231.)

The outdoor/indoor EEV operates normally?

Check the amount of coolant.

1.   How to check

Test operation

Yes

Connect S-net to vacuum.(forceful)

Check the pipeline.

No

Clogging in the pipe? (ex-filter) 

Outdoor unit display

 

Indoor unit display

 ×(Operation)    

◑

(Timer)    

◑

(Fan)    

◑

(Filter)    

◑

(Defrost)

Criteria 

 • The Cond out sensor temperature is detected below -35°C.

Cause of problem 

•  Insufficient coolant, clogging in the motor.
• Bad compressor.
• Bad Cond out sensor.
• The outdoor compressor's Discharge Check Valve leaks.
•  Exceeding the temperature limit (For heater operation, the outside temperature is below -20°C.  

For AC operation, the outside temperature is below -5°C) Possibilities for errors.

Содержание AVXCSH023/032/040CE












































































































































































































































































































































































Отзывы:

Нет отзывов