72
73
Chapter 3.
Using the computer
4
Select
Save
to save the changes.
5
If the system automatically restarts and the Samsung logo
screen appears, press the
Home button
áᔪ
Ŗᮁ
᯲
ᰆ⊹
ᖅᱶ
several times.
6
Select
Security > TPM Configuration and set the TPM
Device item
to
Enabled
.
Set the TPM State
to
Enable & Activate
.
TPM Device
TPM State
Security Chip State
Aptio Setup Utility - Copy (C) 2012 American Megatrends, Inc.
Enabled
Enabled & Activate
Clear
Enabled & Activate
Deactivate & Disable
Clear
7
Select
Save
to save the changes.
8
The computer automatically restarts. Initialization of the TPM
chip has been completed. Now, install the TPM program and
register the TPM program.
Installing the TPM program
You can install the TPM program as follows. Install the program
according to the procedures below.
This program is only provided for models with Recovery and
the TPM function.
1
When the computer is off, press the
Power
button while
holding down the
Volume
(+) button.
Select Recovery
to enter software recovery mode.
2
Select
System Software
. If the message box appears, click
Yes
.
The computer boots up in Windows.
3
If you move to the Desktop screen, the
SW Update
program
runs.
Select
TPM Host SW
and click
Install Now
.
If the system software media is supplied with the product,
you can install the program by using the system software
media (only when supplied.)
4
After the installation, if you click
OK
, the computer restarts.
Using the TPM Security Device
(Optional)
