Smart Install mode
This model supports Smart Install mode which checks installation status to find out if there is any problems with any of the
functions . Execute Smart Install mode after installation .
1 . Check the installation status of the air conditioner .
1) Check the power supply, service valve (if it's open), power cable of the indoor and outdoor unit and amount of
additional refrigerant required for pipe extension .
2) Status of the indicator after supplying the power : Standby status
2 . When the air conditioner is in standby status, use the remote controller to start the Smart Install mode .
1) Press the [Set/Cancel or Cancel], [Mode], [Power] button simultaneously for 4 seconds .
Smart Install mode can be operated only with the supplied remote controller .
During the Smart install mode procedure, remote controller cannot be operated .
❋
Remote controller may be different (image/functions) depending on the model .
English-49
In
St
A
ll
At
IO
n
05
NA_GOOD_A3050_IB&IM_EN_DB68-04387A-00.indd 49
11/26/2013 9:56:41 PM
