24
English
Ins
tallation
Only for multi system
(Wried remote controller, central remote controller etc.)
1
Turn the power off and take off the cover panel of the
indoor unit.
1
2
2
Attach the Sub PCB to the Case Sub PCB.
3
Assemble the Case Sub PCB to the indoor unit.
4
Find the PCB wire, and connect the wire to the Sub PCB
as seen in the picture.
5
Connect the wire(remote controller, central remote
controller etc) to the Sub PCB.
6
Assemble the Cover PCB and the front panel.
If the Sub PCB is not installed, arrange the wire for
multi system (connection) as shown in the illustration.
NOTE
•
The Sub PCB is attached to be controlled by the wired
remote controller and central controller.
Sub PCB installation(optional)
Wire for multi
system connection
Sub PCB
Case Sub PCB
A3050_EU_Best model_IM_DB68-06152A-00_EN.indd 24
2016/4/20 14:10:28
