37
Selecting the installation location
t
There must be no obstacles near the air inlet and outlet.
t
Install the indoor unit on a ceiling that can support its weight.
t
Maintain sufficient clearance around the indoor unit.
t
Make sure that the water dripping from the drain hose runs away correctly and safely.
t
The indoor unit must be installed in this way, that they are out of public access. (Not touchable by the users)
t
After connecting a chamber, insulate the connection part between the indoor unit and the chamber with t10 or
thicker insulation. Otherwise, there can be air leak or dew from the connection part.
t
Rigid wall without vibration.
t
Where it is not exposed to direct sunshine.
t
Where the replacement parts. (air filter, heat exchange element, humidifier element) can be removed and cleaned
easily.
Space Requirements
Inspection hole('E'mm) for DX-COIL,
Humidifier element
Inspection hole('E'mm) for filter, heat
exchange element, fan, motor and
damper
'B' mm
'A' mm
'D' mm
Return Air
Exhaust Air
Supply Air
Outdoor Air
'C' mm
Model
'A'
'B'
'C'
'D'
'E'
AM050FNKDEH
1000
1553
600
200
450 x 450 or more
AM100FNKDEH
1135
1763
800
300
550 x 550 or more
t
The ventilator should be installed in a ceiling which has enough space above as seen in the picture.
20mm or more
20mm or more
'A' mm
Space for installation :
'B'mm
Model
'A'
'B'
AM050FNKDEH
320
600
AM100FNKDEH 440
800
ENGLISH
