Samsung AM009FN4DCH, Руководство пользователя, Страница: 32 / 37

32
Setting an indoor unit address and installation option
Changing a particular option
You can change each digit of set option.
Option SEG1 SEG2 SEG3 SEG4 SEG5 SEG6
Explanation PAGE MODE
The option mode
you want to change
The tens’ digit of an
option SEG you will
change
The unit digit of an
option SEG you will
change
The changed value
Remote
controller
display
Indication and
details
Indication Details Indication Details Indication Details Indication Details Indication Details Indication Details
0 D
Option
mode
1~6
Tens’ digit
of SEG
0~9
Unit digit of
SEG
0~9
The
changed
value
0~F
t When changing a digit of an indoor unit address setting option, set the SEG3 as ‘A’.
t When changing a digit of indoor unit installation option, set the SEG3 as ‘2’.
Ex) When setting the ‘buzzer control’ into disuse status.
Option SEG1 SEG2 SEG3 SEG4 SEG5 SEG6
Explanation PAGE MODE
The option
mode you
want to
change
The tens’ digit
of an option
SEG you will
change
The unit digit
of an option
SEG you will
change
The changed
value
Indication 0 D 2 1 7 1
NOTE
t If you are using heat pump model, mixed operation mode (two or more indoor units operating in different
operation mode simultaneously) is not available when the indoor units are connected to same outdoor
unit. If you set the master indoor unit with a remote controller, outdoor unit will operate in the mode which
was set in the master indoor unit.
CAUTION