Samsung AM009FN4DCH, Руководство пользователя, Страница: 31 / 37

31
ENGLISH
Option SEG7 SEG8 SEG9 SEG10 SEG11 SEG12
Explanation PAGE
(When setting SEG3)
Standard for mode change
Cooling Heating
(When setting SEG3)
Time required for mode
change
Compensation option for Long
pipe or height diffference between
indoor units
Remote
controller
display
Indication and
details
Indication Details Indication Details Indication Details Indication Details
1
0 1.8 °F (1 °C) 0 5 min. 0 Use default value
1 2.7 °F (1.5 °C) 1 7 min.
1
1) Height difference 1) is
more than 30m
or
2) Distance
2)
is longer
than 110m
2 3.6 °F (2 °C) 2 9 min.
3 4.5 °F (2.5 °C) 3 11 min.
4 5.4 °F (3 °C) 4 13 min.
2
1) Height difference 1) is
15~30m
or
2) Distance
2)
is 50~110m
5 6.3 °F (3.5 °C) 5 15 min.
6 7.2 °F (4 °C) 6 20 min.
7 8.1 °F (4.5 °C) 7 30 min.
1) Height difference : The difference of the height between the corresponding indoor unit and the indoor unit installed
at the lowest place.
For example, When the indoor unit is installed 40m higher than the indoor unit installed at the
lowest place, select the option "1".
2) Distance : The difference between the pipe length of the indoor unit istalled at farthest place from an outdoor unit
and the pipe length of the corresponding indoor unit from an outdoor unit.
For example, when the farthest pipe length is 100m and the corresponding indoor unit is 40m away from
an outdoor unit, select the option "2". (100 - 40 = 60m)
SEG 3, 4, 5, 6, 8, 9 additional information
When the SEG 3 is set as "1" and follow Auto Change Over for HR only operation, it will operate as follows.
C
ooling
T
hermo O
ff
Hea
ting
T
hermo O
ff
C
ooling
T
hermo On
Hea
ting
T
hermo On
B C
D
Ts
A
c
a
Temp.
d
b
Standard temp.
for Heating
Standard temp.
for Cooling
Standard temp. for
Heating Cooling
Standard temp.
for Cooling
Heating
Set temp. for
Auto mode
A : Set with SEG4
B : Set with SEG5
C : Set with SEG6
D : Set with SEG8
❇
Cooling/Heating mode can be changed when Thermo Off status is maintained during the time with SEG9.