Samsung AM FN1DEH Series, Руководство по установке, Страница: 34 / 50

34
Setting an indoor unit address and installation option
• When “A”~”F” is entered to SEG5~6, the indoor unit MAIN ADDRESS is not changed.
• If you set the SEG 3 as 0, the indoor unit will maintain the previous MAIN ADDRESS even if you input
the option value of SEG5~6.
• If you set the SEG 9 as 0, the indoor unit will maintain previous RMC ADDRESS even if you input the
option value of SEG11~12.
• You cannot set SEG11 and SEG12 as F value at the same time.
• If the indoor unit is connected to the MCU, you can set the SEG 15~18.
• If you want to set the indoor unit to ‘A’ port of MCU #1. (0A0000 – 100000 – 20101A -30000)
CAUTION
Setting an indoor unit installation option (suitable for the condition of each installation location)
1. Check whether power is supplied or not.
- When the indoor unit is not plugged in, there should be additional
power supply in the indoor unit.
2.
The panel(display) should be connected to an indoor unit to receive
option.
3.
Set the installation option according to the installation condition of an
air conditioner.
- The default setting of an indoor unit installation option is “020010-
100000- 200000-300000”.
- Individual control of a remote controller(SEG20) is the function that
controls an indoor unit individually when there is more than one indoor
unit.
4.
Set the indoor unit option by wireless remote controller.
Indoor Unit
1(L)
F2
F1
2(N)