background image

Saf
ety
 Inf
or

mation

 

7

English

FOR USING

  WARNING

 

If the appliance is flooded, please contact your nearest service centre.

• 

Failing to do so may result in electric shock or fire.

 

If the appliance generates a strange noise, a burning smell or smoke, 

unplug the power plug immediately and contact your nearest service 

centre.

• 

Failing to do so may result in electric shock or fire.

 

In the event of a gas leak (such as propane gas, LP gas, etc.), ventilate 

immediately without touching the power line. Do not touch the appliance 

or power line.

•  Do not use a ventilating fan.

• 

A spark may result in an explosion or fire.

 

To reinstall the air conditioner, please contact your nearest service centre.

•  Failing to do so may result in problems with the product, water leakage, 

electric shock, or fire.

•  A delivery service for the product is not provided. If you reinstall the 

product in another location, additional construction expenses and an 

installation fee will be charged.

• 

Especially, when you wish to install the product in an unusual location 

such as in an industrial area or near the seaside where it is exposed to salt 

in the air, please contact your nearest service centre.

 

Do not touch the circuit breaker with wet hands.

• 

This may result in electric shock.

 

Do not turn the air conditioner off with the circuit breaker while it is 

operating.

•  Turning the air conditioner off and then on again with the circuit breaker 

may cause a spark and result in electric shock or fire.

Содержание AJ020NBNDEH















































Отзывы: