Samsung AJ007JNADCH, Руководство по обслуживанию, Страница: 69 / 118

Samsung Electronics 4-15
TYPE PICTURE MODEL
TO SET ADDRESSING MANUALLY BY
ROTARY SWITCH “SW02”
SLIM DUCT
AJ009JNLDCH
AJ012JNLDCH
AJ018JNLDCH
SW
Same for:
ROTARY SWITCH “SW02” POSITION ACCORDING TO REFRIGERANT CIRCUIT CONNECTED ( 0=A; 1=B; 2=C; 3=D )
OUTDOOR UNIT
A unit
OUTDOOR UNIT
A unit
B unit
C unit
Indoor Unit
SW02
Indoor Unit
SW02
0 0
INSTALLATION TEST MODE (with all indoor units functioning)
Please do cool mode try-run or heat mode try run.
Cool mode try-run : Push the [K2] button three times.
Heat mode try-run : Push the [K2] button once.
After 12 minutes of stationary condition check each indoor unit air treatment:
Cooling mode (indoor unit check) --> Inlet air temp. - Outlet air temp: From 10°K to 12°K ( indicative delta T)
Heating mode (indoor unit check) --> Outlet air temp. - Inlet air temp: From 11°K to 14°K (indicative delta T)
In heating mode, the indoor fan motor can remain off to avoid cold air blown into conditioned space.
Att. "A" Att. "A"
1 1
2
Att. "B" Att. "B"
Att. "C"
B unit
AJ020JCJ2CH AJ024JCJ3CH