Samsung AJ007JNADCH, Руководство по обслуживанию, Страница: 61 / 118

Samsung Electronics 4-7
Setting Option
High Temp Button High Fan Button
Mode change
Low Temp Button
Low Fan Button
Entering mode for
setting option
Option
setting mode
X
Setting Option
1. Remove batteries from the remote controller
2. Insert batteries and enter the option setting mode while pressing High Temp button and Low Temp button.
3. Each time you press Low Fan button, 7-seg on left side is increased by “1” and each time you press High Fan button,
7-seg on right side is increased by “1”
4. You press
button to move to the next setteing page.
5. After setting option, press button to check whether the option code you input is correct or not.
6. Press operation button with the direction of remote control for set.
t 4&(4&(4&(4&(BSFOPUTFUBTQBHFPQUJPO
t 4FUUIF4&(4&(BT0/TUBUVTBOE4&(4&(BT0''TUBUVT
EX) Set the each option separately since you cannot set the ADDRESS setting and indoor unit
installation setting option at the same time.
¤
¤
¤
¤
¤
¤
¤
¤
¤
(AJ***JNN/JNA***)
4-2 Setting Option Setup Method
4-2-1 Setting an indoor unit address and installation option