8
Installation Procedure
English
Instal
lation Pr
oc
edur
e
Installation Procedure
•
Install the unit in a location where the pipes and the
cables can be easily connected to the indoor unit.
•
Install the unit on a flat, stable surface that can
withstand the weight of the unit. Otherwise, the unit
can generate noise and vibration during operation.
•
Install the unit so that the air flow is directed towards
the open area.
•
Maintain sufficient clearance around the outdoor unit,
especially from a radio, computer, stereo system, etc.
Fuse
Fuse
Control
1.5 m or
mor
e
1 m or
mor
e
1 m or
mor
e
1.5 m or more
1.5 m or more
300 mm
StereoComputer etc
Outdoor Unit
200 mm
Air Guide Duct (This product is not provided by Samsung)
Indoor Unit
•
Install the unit at a height where its base can be firmly
fixed in place.
•
Make sure that the water dripping from the drain hose
runs away correctly and safely.
CAUTION
•
You have just purchased a system air conditioner and it
has been installed by your installation specialist.
•
This device must be installed according to the national
electrical rules.
•
If your outdoor unit exceeds a net weight of 60 kg, do
not install it on a suspended wall, but stand it on a
floor.
•
When installing the outdoor unit at the seaside, make
sure that it is not directly exposed to sea breeze. If
you cannot find an adequate place free from direct
sea breeze, construct a protection wall or a protective
fence.
‐
Install the outdoor unit in a place (such as near
buildings etc.) where it can be prevented from sea
breeze. Failure to do so may cause a damage to the
outdoor unit.
Sea breeze
Sea breeze
Sea
Sea
Outdoor Unit
Outdoor Unit
•
If you cannot avoid installing the outdoor unit at the
seaside, construct a protection wall around to block
the sea breeze.
•
Construct a protection wall with a solid material such
as concrete to block the sea breeze. Make sure that the
height and the width of the wall are 1.5 times larger
than the size of the outdoor unit. Also, secure a space
larger than 700 mm between the protection wall and
the outdoor unit for exhausted air to ventilate.
Protection wall
Outdoor Unit
Sea breeze
Sea
CAUTION
•
Depending on the condition of power supply, unstable
power or voltage may cause malfunction of the parts
or control system. (At the ship or places using power
supply from electric generator...etc)
•
Install the unit in a place where water can drain
smoothly.
•
If you have any difficulty finding installation location
as prescribed above, contact your manufacturer for
details.
•
Be sure to clean the sea water and the dust on the
heat exchanger of the outdoor unit and apply a
corrosion inhibitor on it. (At least once in a year.)
