18
Installation Procedure
English
4
Using a crimping tool, compress the two points and flip
it over and compress another two points in the same
location.
•
The compression dimension should be 8.0
•
After compressing it, pull both sides of the wire to
make sure it is firmly pressed.
5
Wrap it with the insulation tape twice or more and
position your contraction tube in the middle of the
insulation tape.
Three or more layers of insulation are required.
6
Apply heat to the contraction tube to contract it.
7
After tube contraction work is completed, wrap it with
the insulation tape to finish.
CAUTION
•
Make sure that the connection parts are not exposed
to outside.
•
Be sure to use insulation tape and a contraction tube
made of approved reinforced insulating materials
that have the same level of withstand voltage with
the power cable. (Comply with the local regulations on
extensions.)
WARNING
•
In case of extending the electric wire, please DO NOT
use a round-shaped Pressing socket.
‐
Incomplete wire connections can cause electric
shock or a fire.
Method 1
Method 2
Connection sleeve
Connection sleeve
Compression
dimension
Method 1
Method 2
Compress it 4 times
Compress it 4 times
5mm
5mm
Method 1
Method 2
Insulation tape
40mm
35mm
Insulation tape
Contraction tube
Insulation tape
Instal
lation Pr
oc
edur
e