Samsung AH68-01959S, Инструкция по эксплуатации

Страница: 31 / 36

ENG
61
Convenient Functions
You can set the time that the Home Theater will shut itself off.
Press the
SLEEP
button.
Each time the button is pressed, the preset time changes as follows :
10
➝ 20 ➝ 30 ➝ 60 ➝ 90 ➝ 120 ➝ 150 ➝ OFF.
To confirm the sleep timer setting, press the SLEEP button.
The remaining time before the Home Theater will shut itself off is displayed.
Pressing the button again changes the sleep time from what you have set earlier.
To cancel the sleep timer, press the
SLEEP
button until <OFF> appears on
the display.
Sleep Timer Function
You can adjust the brightness of the display on the main unit so it won't interfere with your movie viewing.
Press the DIMMER button.
Each time the button is pressed, the brightness of front display will be adjusted.
Adjusting Display Brightness
This is useful when answering a doorbell or telephone call.
Press the MUTE button.
< MUTE > appears in the display.
To restore the sound, press the button again.
Mute Function
MISCELLANEOUS
Listening to Radio
60
Presetting Stations
1
Press the TUNER button to select the FM band.
2
Tune in to the desired station.
Automatic Tuning 1 : When the button is pressed, a preset broadcast station is selected.
Automatic Tuning 2 : Press and hold the button to automatically search for active
broadcasting stations.
Manual Tuning : Briefly press the button to increase or decrease the frequency incrementally
1
Press the FUNCTION button to select the FM band.
2
Select a broadcast station.
Automatic Tuning 1 : Press the
STOP
( ) button to select
<PRESET>
and then press the
button to select the preset station.
Automatic Tuning 2 : Press the STOP ( ) button to select <MANUAL> and then press and hold
the button to automatically search the band.
Manual Tuning : Press the
STOP
( ) to select
<MANUAL>
and then briefly press the
button to tune in to a lower or higher frequency.
Press the MO/ST button to listen in Mono/Stereo.
Each time the button is pressed, the sound switches between <STEREO> and <MONO> .
In a poor reception area, select MONO for a clear, interference-free broadcast.
,
,
• This unit does not receive AM broadcasts.
Example : Presetting FM 89.10 in the memory
1
Press the
TUNER
button to select the
FM
band.
2
Press the button to select <89.10>.
3
Press the
TUNER MEMORY
button.
“01” flashes in the display.
4
Press the button to select preset number.
You can select between 1 and 15 presets.
5
Press the
TUNER MEMORY
button again.
Press the TUNER MEMORY button before “ number ” disappears from the display.
“ number ” disappears from the display and the station is stored in memory.
6
To preset another station, repeat steps 2 to 5.
To tune in to a preset station, press the button on the remote
control to select a channel.
,
Remote Control
Main Unit
TXQ120(45~69P) ENG_CA 2007.3.15 9:38 AM Page 60