35
ENGLISH
Number of
press
Display contents
Display
Units
Segment 1
Segment 2
Segment 3
Segment 4
12
Target discharge
temperature
C
100s digit
10s digit
1s digit
°C
13
EEV
D
1000s digit
100s digit
10s digit
step
14
Protective control
E
0 : Cooling
1 : Heating
Protective control
0 : No protective
control
1 : Freezing
2 : Defrosting
3 : Over-load
4 : Discharge
5 : Total current
Frequency status
0 : Normal
1 : Hold
2 : Down
3 : Up_limit
4 : Down_limit
-
15
IPM temp.
F
+/-
10s digit
1s digit
°C
long-1
Main Micom version
Year(Dec)
Month(Hex)
Day(two digit)
Day(One digit)
-
long-1 and 1
Inverter Micom version
Year(Hex)
Month(Hex)
Day(two digit)
Day(One digit)
-
long-1 and 2
EEPROM version
Year(Hex)
Month(Hex)
Day(two digit)
Day(One digit)
-
5. DIP Switching setting
KEY
ON (default)
OFF
Remark
K5
Heat Pump
Heating Only
K6
Anti-stack snow mode OFF
Anti-stack snow mode ON
K7
Silence operation
In silence mode, no
guarantee of capacity
K7
K8
Mode
K8
ON
ON
Silence mode Step 1
ON
OFF
Silence mode Step 2
OFF
ON
Silence mode Step 3
OFF
OFF
Silence mode Step 1
•
Incorrect handling of thermostat, safety valve or other valves may lead to tank rupture. When servicing the unit
follow instructions carefully:
- Always turn off main power supply when water supply is being shut off.
- Test the free operation of the safety valve regularly by opening the valve ensuring the water flows freely.
- Electrical connection and all servicing of the electrical components should only be carried out by an
authorized electrician.
- Fitting and all servicing of plumbing fixtures should only be carried out by an authorized installer.
- When replacing the thermostat, safety valve or any other valve or part supplied with this unit, use only
approved parts of the same specification.
WARNING
EHS MONO_ODU_IM_05387A-01_BOOK.indb 35
2015-06-25 오후 4:40:24
