Cleaning the Air Cleaner (Continued)
E-
16
3
Replace the old HEPA filter with new one.
5
Press the button for 2 seconds.
Result:
◆
The HEPA Indicator on the control panel turns off. It will
light up again when the time for the next filter replacement
comes.
◆
The air cleaner beeps.
4
After pushing the Dust Filter Section back into the place,
close the Filter box.
Replacing the Dust Filters
The HEPA filter is responsible for eliminating fine particles of dust, molds
and mites in the air that are small as 0.5 microns. Replace the HEPA filter
every 2~3 years or whenever the HEPA Indicator lights on.
1
Open the Filter box and pull out the Dust Filter Section as seen in the
picture.
2
Pull out the HEPA filter from the Dust Filter Section.
◆
The Metallic Pre-filter can be used permanently. Clean it every
month with running water.
◆
Detach the Metallic Pre-filter by pulling it out from the groove on
the filter frame.
◆
You only need to replace the HEPA Filter once in 2~3 years or
when the HEPA Indicator lights up. However, the replacing
frequency of the HEPA Filter may vary according to the time and
place that the air cleaner is operated.
◆
You can purchase new HEPA filter in an authorized service center.
N
N
N
N
o
o
o
o
tt
tt
e
e
e
e
Metallic Pre-filter
(Nano Silver Coating)
HEPA filter
Even though the HEPA Indicator does not light up,
always press the button for 2 seconds after replacing
the HEPA filter.
IM
PORTANT
Dust filter section
ACW341C IB_E_22911 2006.1.23 2:11 PM Page 16
