SET ANSWER MODE
You can receive internal calls in one of three modes (see
Answering Intercom
Calls under Intercom Calls for descriptions):
•
While on-hook, press
TRSF
and then dial
103
.
•
Dial
0
for Ringing,
1
for Auto Answer or
2
for Voice Announce.
•
Press
TRSF
to store your selection.
NOTE: When your keyset is programmed for Auto Answer and you have For-
ward No Answer (FNA) turned on, you must answer screened transfers by press-
ing
ANS/RLS
or the
MONITOR
key if you are using a 7B phone before your FNA
timer expires or the call will forward.
AUTOMATIC HOLD
While on an outside call, pressing a line key, route key or a flashing
CALL
button will automatically put your call on hold and connect you to the next call.
This feature can be turned on or off at your keyset.
•
With the handset on-hook, press
TRSF
and then dial
110
.
•
Dial
21
to turn Automatic Hold on or
20
to turn it off.
•
Press
TRSF
to store your selection.
NOTE: Intercom calls can be automatically put on hold by pressing
TRSF
.
HEADSET OPERATION
Keyset users can switch between headset mode and handset mode. When us-
ing headset mode, press the
ANS/RLS
or the
MONITOR
key if you are using a
7B phone to answer and release calls.
•
With the handset on-hook, press
TRSF
and then dial
110
.
•
Dial
41
to use the headset or
40
to use the handset.
•
Press
TRSF
to store your selection.
Your keyset may be equipped with a Headset mode key. If it is so equipped
pressing this key while the light is out will cause the keyset to enter headset
mode and the light will illuminate to indicate this. Pressing the key while the light
is lit will cause the keyset to return to handset mode and the light will go out.
[RELEASE 3 & 4 ONLY]
34
HOT KEYPAD
On the DCS, your keyset’s keypad can be made “live” or “hot” so that it is not
necessary to lift the handset or press
SPK
or the
MONITOR
key before you
begin dialing. Calls can be made and features activated by simply dialing the
C.O. line number, trunk group access code, intercom number or feature access
code. To activate this feature:
•
With the handset on-hook, press
TRSF
and then dial
110
.
•
Dial
51
to turn the Hot Keypad on or
50
to turn it off.
•
Press
TRSF
to store your selection.
KEY CONFIRMATION TONE
You can hear a short beep (confirmation tone) each time you press a button on
the dial pad. This tone can be turned on or off.
•
While on-hook, press
TRSF
and then dial
110
.
•
Dial
60
to turn tones off or
61
to turn tones on.
•
Press
TRSF
to store your selection.
REJOINING A PAGE
This feature allows you to hear the remaining portion of an ongoing internal page
after you return your keyset to idle. To enable this feature:
•
With the handset on-hook, press
TRSF
and then dial
110
.
•
Dial
71
to turn this feature on or
70
to turn it off.
•
Press
TRSF
to store your selection.
RING PREFERENCE
This feature automatically answers ringing calls when you lift the handset or
press the
ANS/RLS
or the
MONITOR
key if you are using a 7B phone. This
method will always answer calls in the order they arrived at your keyset. When
you turn ring preference off, you must press the flashing button to answer a call,
allowing you to answer calls in the order you choose.
•
With the handset on-hook, press
TRSF
and then dial
110
.
•
Dial
81
to turn ring preference on or
80
to turn it off.
•
Press
TRSF
to store your selection.
35
