manualshive.com logo in svg

Samsung 500N - CLP Color Laser Printer, Руководство по установке

Поделиться
Скачать
Samsung 500N - CLP Color Laser Printer Скачать руководство пользователя страница 9

S

ETUP

 G

UIDE

9

English

6

Hold the handle on the imaging unit with the green roller 
facing you. Align the imaging unit with the slots in your 
printer so that the colors on both sides of the imaging unit 
slide into the corresponding colors of the slots.

C

AUTION

:

 

Insert the imaging unit carefully so as not to scratch 

and damage the surface of the green roller.

7

Slide the imaging unit down into the printer until it cannot 
be pushed in any further and fold the handle down. 

C

AUTION

:

 

To prevent damage, do not expose the imaging unit 

to light for more than a few minutes. Close the top and left 
cover should the setup need to be halted for any reason.

Содержание 500N - CLP Color Laser Printer






















































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды