manualshive.com logo in svg

Samsung 500N - CLP Color Laser Printer, Руководство по установке

Поделиться
Скачать
Samsung 500N - CLP Color Laser Printer Скачать руководство пользователя страница 31

1

This manual is provided for information purposes only. All information included herein is 
subject to change without notice. Samsung Electronics is not responsible for any changes, 
direct or indirect, arising from or related to use of this manual.

© 2003 Samsung Electronics Co., Ltd. All rights reserved.

• CLP-500, CLP-500N and Samsung logo are trademarks of Samsung Electronics 

Co., Ltd.

• Centronics is a trademark of Centronics Data Computer Corporation.

• IBM and IBM PC are trademarks of International Business Machines Corporation.

• Microsoft, Windows, Windows 9x, Window Me, Windows 2000, Windows NT 4.0 

and Windows XP are registered trademarks of Microsoft Corporation.

• All other brand or product names are trademarks of their respective companies or 

organizations.

Содержание 500N - CLP Color Laser Printer






















































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды