manualshive.com logo in svg

Samsung 500N - CLP Color Laser Printer, Руководство по установке

Поделиться
Скачать
Samsung 500N - CLP Color Laser Printer Скачать руководство пользователя страница 37

7

Environmental and Safety Consideration

Laser Safety Statement

The printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR, 
chapter 1 Subchapter J for Class I(1) laser products, and elsewhere, is certified as a 
Class I laser product conforming to the requirements of IEC 825.

Class I laser products are not considered to be hazardous. The laser system and 
printer are designed so there is never any human access to laser radiation above a 
Class I level during normal operation, user maintenance, or prescribed service 
condition.

W

ARNING

 

Never operate or service the printer with the protective cover removed from Laser/
Scanner assembly. The reflected beam, although invisible, can damage your eyes.
When using this product, these basic safety precautions should always be followed to 
reduce risk of fire, electric shock, and injury to persons:

Содержание 500N - CLP Color Laser Printer






















































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды