• SAMSUNG Electronics is not responsible for any damages to the product or harm to
customers when the installation is done by the customer.
• This product is for installing on cement walls. The product may not stay in place when
installed on plaster or wood.
Components
Only use the components and accessories shipped with the product.
Wall Bracket(1)
Hinge(Left 1, Right
1)
Plastic
Hanger
(4)
Screw
(A)(11)
Screw
(B)(4)
Anchor
(11)
To mount the product on the wall bracket
The shape of the product may vary depending on the model. (The assemblies of the plastic
hanger and the screw are the same)
1. Remove the 4 screws on the back of the product.
2. Insert the screw B into the plastic hanger.
Notice
• Mount the product on the wall bracket and make sure it is properly fixed to the left
and right plastic hangers.
• Be careful when installing the product on the bracket as fingers can be caught in the
holes.
• Make sure the wall bracket is securely fixed to the wall, or the product may not stay
in place after installation.
3. Tighten the 4 screws in step 2 (plastic screw B)to the rear holes of the product.
Introduction
Содержание 400UX - SyncMaster - 40" LCD Flat Panel Display
Страница 24: ...460UXN 3 460UX 3 Introduction ...
Страница 25: ... Dimension with welcome board Introduction ...
Страница 63: ...z If the connection is established via Ethernet enter the IP that was entered for the display device ...
Страница 142: ... Apply the Screen Erasing function Symptom 2 Vertical blocks move while erasing the display Information ...