manualshive.com logo in svg

Samsung 400UX - SyncMaster - 40" LCD Flat Panel Display, Руководство пользователя

Поделиться
Скачать
Samsung 400UX - SyncMaster - 40

Temperature Control

Detects the product's internal temperature and specifies the desired temperature.

The product is set to 77°C by default.

 Note

• The picture will be dimmed if the temperature exceeds the specified temperature, and the

product will automatically power off to prevent overheating if the temperature keeps rising.

• It is best to use the product at temperatures 75 - 80°C (based on ambient temperature of

40°C).

Refer to "Specifications" herein for details about operating conditions.

Current Temperature

Shows the current temperature of the product.

Auto Power

Enables or disables 

Auto Power

 for the product.

•

Off

•

On

 Note

When

 Auto Power

 is 

On

, the product will power on automatically as soon as it is connected

to power.

Adjusting the LCD Display

Содержание 400UX - SyncMaster - 40" LCD Flat Panel Display






















































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды